| Customization: | Available |
|---|---|
| After-sales Service: | Online Support |
| Warranty: | One Year for Core Components |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Concrete mixer truck is a special truck used to transport concrete for construction; because of its shape, it is often referred to as a field snail truck. These trucks are equipped with cylindrical stirrer to carry mixed concrete. In the course of transportation, the mixing drum will always be rotated to ensure that the concrete carried will not solidify. After the concrete is transported, the inner part of the mixing drum is usually flushed with water to prevent the hardening of the concrete from occupying space, so that the volume of the mixing drum becomes smaller and smaller.
Chusheng vehicle is specialized in concrete mixer truck over 15 years,we can offer
1. Concrete mixer truck opting left hand drive or right hand driven.
2. Optional for chassis: 4x2, 4x4,6x4, 6x6, 8x4, 8x8 models.
3. 3m3, 5m3, 6m3, 8m3, 9m3, 10m3, 12 m3 14m3 etc, many capacity are available to choose.
4. Provide different brand chassis: DONGFENG, SINTRUK, SHACMAN, NORTH BENS, FOTON, HINO, HUNDAI, JMC.
Products Feature:
1. The tank body uses double helical blades that makes its density moderate, with symmetrical mixing board on the front taper place; double blades and guiding blades of discharge are installed on the outlet of tank, which makes the discharge more evenly, faster in speed, and convenient for the pumping transportation of other devices (such as automobile pump).
2. Low angle for mixing drum can extend the service life of hydraulic pump, motor and reducer. The sub frame uses high intensity square tube with damping in the central area that can play role when vehicle is at full load and under the bad conditions of road, which can lower the center of gravity of truck and make it move more smoothly.
3. The upload production of this mixer adopts multiple advanced technology, which can produce various types of mixer in volume such as 3m3, 5m3,6m3,8m3, 9m3,10m3, 12 m3 etc.
SINOTRUK HOWO 8X4 14m³ Concrete Mixer Truck
| Cabin | Left hand driven. HW76 cab, with two bunks, one sleeper, 70° hydraulically tillable to the front as attached photo for ref. |
||
| Vehicle Main Dimensions | (L x W x H)mm | 11400×2496×3800 | |
| Wheel base (mm) | 1950+3600+1400 | ||
| Wheel track (front/rear) (mm) | 2020/1820 | ||
| Approach/Departure angle(°) | 20/24 | ||
| Weight in KGS | Tare Weight | 16550 | |
| Loading Capacity | 14m³ | ||
| Front axles loading capacity (HF9drum) | 2x9000 | ||
| Rear axles loading capacity (HC16) | 2x16000 | ||
| Max. driving speed(km/h) | 90 | ||
| Engine | Brand | sinotruk | |
| Model | WD615.47 | ||
| Type | 4-stroke direct injection , 6-cylinder in-line with water cooling, turbo-charging and inter-cooling | ||
| Horse Power(HP) | 371HP | ||
| Emission standard | Euro 2 | ||
| Gearbox | HW19710, 10 forwards & 2 reverse | ||
| Clutch | Reinforced diaphragm clutch, diameter 430mm | ||
| Fuel tank (L) | 400L | ||
| Tire | 10.00R20 All steel radial tire with one spare tire , total 7 pieces | ||
| Brakes | Service brake: dual circuit compressed air brake Parking brake :(emergency brake): spring energy, compressed air operating on rear wheels Auxiliary brake: engine exhaust valve brake |
||
Thickness |
End plate | 6mm in high tensile strength steel |
| Mixer body | 6mm in high tensile strength steel | |
| Mixer body Volume | M3 | 14m³ |
Hydraulics |
Motor | Eaton ACA5423 |
| Gear box | Italy PMP 6SP | |
| Pump | ARK MF89 |
PRODUCT SHIPPING (RORO OR BULK SHIP OR CONTAINER)
RORO: The truck is driven to the ship inside directly and fixed well. It can protect the truck being rusty and broken during shipping.
BULK: The truck is lifted by crane then put on the vessel deck. This model is much cheaper.
CONTAINER: The truck is put into the container. This model is used for small model trucks
Pre-sale service:
1. Reply enquiries in 24 hours.
2. Market research and forecast for customer.
3. Provide unique and professional solutions based on customer's requirement.
4. Data sheet and samples offer.
5. Other services, such as special packing design, factory visiting and so on.
In-sale service:
1. Tracking report in producing.
2. Quality test report for every order.
3. Photos and videos as per customer's requirement.
After-sale service:
1. Lifetime free maintenance and upgrade. Spare parts could be supplied by cost price.
2. Free technician training, engineer abroad for customer service.
3. Full set of documents free of charge, which including installation guidance, software operation manual, easy maintenance manual and control system software CD and so on.
4. Special service for big project, such as stadium, exhibitions, squares and so on.
FAQ
1. MOQ: 1 unit
2. Optional payment terms: T/T or L/C
T/T: 30% deposit by T/T, 70% balance should be paid before shippment.
L/C: 30% payment advance, 70% L/C at sight.
3. Parts of famous brand can be adopted by your requirement.
4. Delivery time: Within15 workdays after receiving 30% deposit of T/T
Warranty
1. One year quality guarantee for three key parts axles, engine, transmission or within 100000km, which comes the first.
2. Other spare part could be supplied by OEM at cost prices.
3. Regularly callback to know the vehicle's working status.
4. The overseas engineers are always ready to deal with unexpected needs.
Your are always welcome to visit our factory at any time.
For more information about trucks and trailers, please contact:
HuBei ChuSheng Vehicle Co., Ltd.
Factory: NO.9, Jiliang Avenue, Suizhou Economic Development Zone,Suizhou, Hubei, China
Office: Room 1108, Eurasia Plaza, No.20 Jinyinhu Road, East- west lake District, Wuhan, Hubei, China.
){kind=link}